Hot Tub Serum Cleaning Kit

Cyber Week Deal 15% Off
  • $75.95
    Unit price per 
  • Save $10.04
CODE CW15 AT CHECKOUT AND SEE THE DISCOUNT
Shipping calculated at checkout.


Description

ALL IN ONE EASY TO USE SYSTEM! 


The Hot Tub Serum Cleaning kit is a complete kit designed for anyone and everyone to be able to do. It consists of a 2-ounce jar of Hot Tub Serum Total Cleanse, 16-ounce bottle of Hot Tub Serum Total Maintenance and a hot tub turbo cleaning mitt. The kit makes it easy for you to purchase everything needed to do a complete spa cleaning in a couple of hours of an afternoon.

How To Use

STEP 1 - PURGE & CLEAN YOUR HOT TUB PLUMBING Add 1 level tsp per 380L (100 US gallons) of HOT TUB SERUM® Total Cleanse to your hot tub water to purge and clean the plumbing lines. Open the air controls and turn the jet pump(s) on to high speed to run for 15-20 minutes. Place Filter(s) in hot tub while "Purging" .The deep cleaning scrubbing action of the foam will begin almost immediately. Brown will appear. Foaming is Normal. Stay close by and watch to ensure that the foam does not spill over the edges of the hot tub. If the foam looks like it sticky scum will overflow the hot tub, turn off your air control(s) until the foam suds dissipate significantly enough to turn the air control(s) on again. Air is an important part of the cleaning process. If your hot tub is releasing a lot of brown scum into the foam, it may be necessary to operate the pump(s) on high speed again for another 20 minutes to allow HOT TUB SERUM® Cleanse product to continue to remove the scum and gunk that has built up in your plumbing lines. After purging and deep cleaning is complete, turn off the pump(s) completely. Remove filter(s) from the tank of the hot tub and rinse them thoroughly.

DRAIN WATER & CLEAN YOUR HOT TUB SURFACES Start draining the water from your hot tub following the directions in your Hot Tub Owner's Manual. As an added precaution, turn off the power to your hot tub. Next, mix 120ml (4.05 US Fl. Oz) of Hot Tub SERUM® Total Maintenance product into a 3.8L (1 US gallon) bucket of water. As the old water is draining out of your hot tub, wipe down all exposed interior surfaces with this mixture using a clean cloth or sponge, working from the top down, and rinsing the surface as you go. Sticky scum and gunk stripped from inside your plumbing and deposited onto the hot tub surface may be removed with a plastic scrubbing pad. After the old water has completely drained, continue cleaning all exposed surfaces, and thoroughly rinse all inside surfaces.

STEP 2 - REFILL WATER & MAINTAIN YOUR HOT TUB with Hot Tub Serum Maintenance: Reinstall your filter cartridge(s). Make sure that they were cleaned thoroughly following the instructions in STEP 1. Refill with fresh water and start your hot tub following the directions in your HotTub Owner's Manual. Balance the water: Total Alkalinity (TA) 100-180, pH 7.4-7.6, Calcium Hardness (CA) 150 -400. After balancing, shock the water with an approved sanitizer. Add an approved sanitizer as per your HOT TUB SERUM retailer's recommendation and directions.

 

 

 Total Serum Cleaning Kit

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question
    ×
    Welcome Newcomer
    Customer Reviews