Orenda SC-1000 Scale and Metal Control
Scale and Metal Control
- Scale control and metal chelant is a proprietary, non-phosphorus containing aqueous formulation
- It is compatible with materials of pool and spa construction
- Features calcium and metal stain reducer
- Contains no phosphorus which contributes to algae growth
Are you having problems with Scale and Metal in your pool water? If so, this is the product for you! Orenda SC-1000 has become a favorite of pool builders, plasterers, and service professionals, and for good reason. SC-1000 is an award-winning, environmentally-friendly chelating agent that binds to metals and minerals. SC-1000 is great for pool startups (and is indeed essential to The Orenda Startup process). It is also used for ongoing maintenance to help prevent carbonate scale formation and metal oxidation/staining.
Why Orenda is Different
SC-1000 contains no phosphates, unlike most metal control products available. This is meaningful because those same products (many of which are phosphate-based) would directly conflict with phosphate removal efforts…but SC-1000 does not.
When used as directed, SC-1000 controls metal staining and scale while being fully compatible with the materials of pool & spa construction and other treatment chemicals. It can also do wonders for removing existing scale in pool heaters, salt chlorine generators, and other equipment.
SC-1000′s formulation was awarded the Environmental Protection Agency’s Presidential Green Chemistry Award for its implementation of environment-friendly chemical technology.
SC-1000 vs. calcium issues
We commonly find confusion about what type of calcium deposits are actually in a pool. Is it carbonation? Calcium dust? Scale? Calcium crystals? While they are different calcium compounds, they are hard to tell apart. One way to think about it is this:
- Scale (calcium carbonate) is formed when too much calcium is in solution in the water, and it falls out of the solution and hardens on surfaces. It will be evident on the face of the tile, inside pipes and heat exchangers, salt cells, etc. The hotter the water, the more likely scale will occur. It occurs due to an LSI violation of being above +0.30 on the LSI.
- Calcite Crystals occur when not enough calcium is present in the water, and the water stays cold for a prolonged period of time. The water is aggressive because it is hungry for more calcium…it seeks equilibrium and wants to be properly saturated. It will extract calcium from wherever it can. The most available source? Plaster and grout. Crystallized calcium is usually some form of calcite that grows out of the plaster surface and hardens. We know of at least 4 different types of calcite crystals. SC-1000 can help soften some of the types, but not all. Unfortunately, some types of crystals require physically grinding them away.
SC-1000 is not a replacement for balancing your water. It also cannot reverse etching already done. Because of this, if you’re going to stray from the LSI safe zone, err to the high side, because the carbonate scale is treatable. Etching, however, is permanent damage.
Apply SC-1000 at the rate of 1 quart per 10,000 gallons of water by pouring either into the skimmer or around the perimeter of the water, with the circulation pump on for the initial application. The initial dose of the SC-1000 depletes the chlorine levels in the water. Test chlorine levels following initial application, and adjust as needed.
To ensure continued protection, apply a maintenance dose of 6 ounces per 10,000 gallons of water weekly.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.